| Lacing | 24 spokes crossed by 1 without contact, double alternance |
| Spokes | DT Swiss champion (160/162mm) |
| Nipples | DT Swiss alu 12mm |
| Rim | Rigida Flyer (330g) |
| Hub | Shimano DH-3D70 36 holes (center lock) |
| Rim tape | Schwalbe cloth |
| Glue | DT Freeze (red glue) |
| Weight with rim tape (without quick release) | 1145g |
| Unique wheel | yes |
| This is my first dynamo wheel. It was particularly difficult to build. Parts are almost impossible to found except the hub. I had to wait 3 months to get the DT spokes (with many follow-up). The lacing requires rim holes correction to turn the nipples towards the good direction. This wheel exceeds 5000km (3100 miles) on my baron used for commuting. | |
Aucun commentaire:
Enregistrer un commentaire